Socket
370 for Coppermine Processors
 |
Socket 370 for
Intel® FCPGA Pentium III TM 500~750+MHz with Built-in 128/256KB
On-die L2 Cache |
 |
Backward
Compatible with PPGA Packaged CeleronTM |
 |
External
Frequencies, Vcore & Vio Adjustable |
Intel® 810 Chipset Supports
100MHz FSB
 |
CUW-B Adapts Intel 810 Chipset
Supports 32-bit 100MHz Host Bus & Display Cache Bus, 64-bit 100MHz System Memory Bus,
32-bit 33MHz Hub Interface & FWH Bus |
 |
Built-in 3D
Graphics |
 |
Supports Dynamic
Display Memory Plus (DDM+) Technology |
 |
Supports 4 PCI, UltraDMA/66, AC
' 97, and Low Pin Count I/O |
Smart Slots - 3 DIMMs for Flexible
Memory
 |
3x 168-Pin DIMM
Sockets Support 8MB to 512MB 3.3V PC100 SDRAM |
 |
Extra 1 DIMM for
More Flexible System Memory Combinations |
 |
ACPI
Suspend-to-RAM Power Plane Ready |
Intel® 3D Graphics &
ASUS® Fine-tuned Driver
 |
Intel®
GMCH Built-in Graphics Supports up to 1280 x 1024 x 24bits at 85Hz for ~20% Enhancement of
3D Performance |
 |
ASUS®
Fine-tuned Linear Driver Provides a ~12% Increase of 2D Performance Than Intel®
Default Non-Linear Driver |
AMR Slot for Software Audio
 |
New Low Pin
Count 46-pin Audio/Modem Riser |
 |
Supports
AMR-based AMC/AC/MC Adapters |
Smart BIOS - JumperFree &
Write-Protect
 |
Award®
4Mb BIOS with Full ACPI, DMI, Green, PnP, VGA, Intel® LAN, Trend®
ChipAway Virus (TCAV) & Symbios® SCSI |
 |
Jumper Setting
by S/W (JumperFree) |
 |
Vcore,
CPU/SDRAM/PCI Ratio & Boot Media Adjustable |
 |
Smart Write
Protection Over Boot Block |
Smart Expansion - 6P / 5P2I
 |
4 PCI for PC '
99 Request, 4 PCI + 1 ISA for Most Backward Compatible Need |
 |
ISA Bridge
Required with Existence of ISA Slot |
I/O Ports
 |
2 x USB Ports
(Support Hot-Plug Function), 1x RJ-45 Port |
 |
2 x Serial
Ports, 1x Parallel Port (EPP, ECP), 1x VGA Port |
 |
1 x Floppy Port
(up to 2.88MB, 3 Mode) |
 |
1 x PS/2
Keyboard Port, 1 x PS/2 Mouse Port |
 |
1 x Game / MIDI
Port, Line-In /Out /Speaker Ports |
UltraDMA/66 Support 66MB/s
 |
2 x UltraDMA/66
Bus Master IDE (Up to 4 IDE Devices & 66MB/s) |
 |
80-pin Cable
Backward Compatible Legacy ATAPI Devices |
 |
ATAPI IDE
CD-ROM, CD-R, CD-RW, and LS-120 Supported |
1st S/W Audio with AC ' 97 CODEC
 |
Software Audio
Controller with Onboard CODEC Comply to AC ' 97 Specification |
 |
Supports 3D
Surround & Positioning, and Full & Half Duplex |
Optional PanelLinkTM
Digital Output
 |
Digital-to-Digital
with no Analog Conversion |
 |
Much Finer &
Sharper Display Quality Than CRT Analog Display |
 |
Adopt by VESA®
& Compaq® /HP® /Intel® /IBM® |
ATX Power Connector
 |
3V, 5V, 5VSB and
12V 20-pin ATX Power Connectors |
 |
Soft Power Off
& Keyboard Power On Supported |
 |
Wake-Up on
Modem, LAN, Keyboard, Mouse & RTC Timer |
 |
AC Power Loss
Recovery Supports |
Baby AT Power Connector
 |
3V, 5V, 5VSB and 12V 20-pin ATX
Power Connectors |
 |
Soft Power Off & Keyboard
Power On Supported |
 |
Wake-Up on Modem, Keyboard,
Mouse & RTC Timer |
 |
AC Power Loss Recovery Supports |
Board Size
 |
AT Form Factor
with size : 19.2cm x 30.5cm (7.6" x 12.0") |
|